As the basic equipment in mobile amusement equipment, the matal bracket pool is carried by water. Without a bracket pool, it cannot be called a water park. Therefore, the position of the bracket pool in the entire mobile water park cannot be ignored. As an important component of the mobile water park, it needs to be maintained regularly to extend the service life of the bracket pool. It is also necessary to repair any damages in a timely manner to ensure the normal use of the bracket pool.
Daily maintenance
The daily maintenance of the support pool is mainly divided into two parts, one is the daily maintenance of the support part, and the other is the daily maintenance of the pool cloth.
**Firstly, let me explain the key points of daily maintenance for the bracket. The bracket is used to shape the swimming pool and counteract the pressure caused by a large amount of accumulated water. Therefore, the material used is mostly strong and durable steel. In order to protect the durability and overall beauty of the steel material, paint will be applied to the surface of the bracket. Bright colors can make the bracket pool look more beautiful as a whole, and the paint can effectively isolate moisture and air, making the steel bracket more corrosion-resistant and less prone to rusting and deterioration, affecting its normal pressure bearing capacity. If it is slowly corroded by moisture, the steel bracket may become brittle and may bend or break when subjected to excessive water pressure, causing the pool to collapse. Due to the large water storage capacity of the bracket pool, the instantaneous collapse of the water flow rate is fast, which will directly affect the pool. Internal tourists causing harm, So it is very important to maintain the steel frame of the support pool on a daily basis.
When inspecting the steel frame, first check for paint peeling. If a large area of paint peeling is found, first identify the reason for the peeling and adjust it according to the results to prevent similar situations from happening again. Then, touch up the paint and repair the peeling area to prevent the steel support from being corroded and shortening the service life of the water amusement equipment. In addition, check whether the support is deformed or bent. This situation is mainly caused by the balanced force distribution of the support pool. Due to the large internal water storage capacity, the pressure formed by the water needs to be borne by the support. If used in areas with slopes, the lower support will bear more pressure. Over time, it may form deformation or bending, which will bring damage to the mobile water amusement park. Safety hazards, if such a situation occurs, it is necessary to restore and repair the deformed bracket, Afterwards, it is necessary to conduct testing to see if it still meets safety standards. If it does not meet the standards, the bracket should be replaced in a timely manner, and the bracket pool should be avoided from being installed in sloping areas. It is more effective to use it on flat ground.
In addition to the bracket, it is also necessary to perform daily maintenance on the pool cloth. It is necessary to check for any damage every day and repair it in a timely manner if any damage is found, in order to prevent the deterioration of the damaged area and the formation of a relatively large injury, which will be even more difficult to repair at that time. After the end of the mobile water park business season, various water amusement equipment should be inspected. The green moss at the bottom of the pool should be wiped off, and the cleaned pool cloth should be placed in a clean and ventilated location for air cooling and drying. If there is no damage, it can be folded and packaged for storage. If damage is found, it is necessary to cut out a repair piece of appropriate size and repair the damaged area. Generally, the size of the repair piece is about three times the size of the repair area, and it is best to cut it into a circular or elliptical shape. Then, the repair piece and repair area should be wiped clean and coated with special glue. Use a hair dryer to dry the side coated with glue, so that the glue does not touch your hands. If you do not have a hair dryer at hand, you can also do so. Let it air dry naturally and achieve a non stick effect, then proceed with bonding, Align the repair patch with the area that needs to be repaired and carefully apply it from one direction, gradually pushing it to the other side. The process should be gentle and not too hasty, so as not to leave bubbles inside and affect the bonding effect. After that, repeatedly flatten it with your hand to achieve a good bonding state. Place the bonded area on a flat hard object, add the same flat weight on top, and press the bonded area down. Generally, it can be fully bonded after 24 hours of pressure, and then you can use it with confidence.
Product Features
1. The bracket pool is made of PVC fabric. It can be dismantled after the business season. After drying the components, they should be stored in the warehouse to prevent mold and rust, and continue to be used the following year.
2. The scaffold swimming pool consumes less, and the water in the scaffold swimming pool can be purified by the equipped automated water purifier, which allows the scaffold swimming pool to be used without changing water during operation.
3. There are various ways to play in the scaffolding swimming pool. The scaffolding pool can be combined with water slides shaped like animal cartoon characters, and different sizes of scaffolding pools can also be combined with inflatable model toys; Form an entertaining and competitive water challenge equipment that can adjust the position of the support swimming pool to change the water challenge level settings, enriching the fun and durability of water challenges.
4. The scaffold swimming pool does not have a deep water area or a shallow water area, and is designed with 100, 132, and 150 types (pool height unit: cm) based on people's height. Stand up swimming pools can be combined with various types of slides, as well as family stand up swimming pools.
The above are the daily maintenance and precautions for the bracket pool in amusement equipment, as well as the characteristics of the bracket pool. For the bracket pool of water amusement equipment, we must be careful, check the specific situation, and regularly perform a systematic maintenance for the product to provide a safer amusement environment for tourists.
